Quick deploy rail system provides tool-free support for racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" - 36".
Dual Hot Plug Redundant Power Supplies (one standard with 1P Models, requires optional RPS for redundancy) 2. Up to Six Available I/O Slots: 3 Standard PCI-Express x4 and 1 Standard 64-bit/133MHz PCI-X. Optional Mezzanine adds Two Hot Plug 64-bit/133MHz PCI-X or two X4 PCI Express, or one X8 PCI Express 3.
4U (7' Height) Rack Form Factor 4. Server Lifting Handles 5. Ships with HP Smart Array P400/256MB Controller. Optional 512MB Battery Backed Write Cache (BBWC ships standard with 2P models) 6. Universal Tool-less 'Snap In' Sliding Rail Solution 7. Systems Insight Display 8. Support for up to 8 Small Form-Factor (SFF) SAS or Serial ATA (SATA) drives 9.
Support for up to Two Slimline Drives (Ejectable, DVD/CD-RW Drive standard, Floppy Drive optional with all models) 10. One front video port. Two front accessible USB 2.0 ports. Two rear accessible USB 2.0 ports (all bootable). Front Panel LED Display (internal and external health, Two Network Port Status, Unit ID light) and Power Button 13. Front accessible Processor drawer (allows access to Processors and Processor Power Modules) 14.
Support for up to four Dual-Core 64-bit Intel® Xeon™ Processors 15. Quick release levers for fast server access 16. Front accessible Hot Plug RAID Memory 17. Six Hot Plug Redundant Fans Standard on all models 18. Standard Bus Expansion The x4-x8 PCI Express Bus Expander is a half-length expansion board.
When installed into an x4 PCI Express expansion slot, the x4-x8 PCI Express bus expander converts the adjacent x4 PCI Express expansion slot into a x8 PCI Express expansion slot. The HP ProLiant DL580 G4 Server can support up to two x4-x8 PCI Express bus expander boards. The bus expander can only be installed in expansion slots 5 and 7 to convert the adjacent lower-numbered expansion slot to a PCI Express x8 expansion slot. For example, installing the board into expansion slot 5 converts expansion slot 4 to a PCI Express x8 expansion slot.
Yes. PCI-X Hot Plug Technology (Two 64bit/133-MHz PCI-X hot plug slots available with the Hot Plug PCI-X Mezzanine Option). Smart Array P400 Controller with optional Battery Backed Write Cache (BBWC) Enabler provides transportable data protection and increases overall controller performance. Up to 512MB Battery Backed Write Cache protection optional on HP ProLiant DL580 G4 (512MB BBWC ships standard with 2P models). Hot Plug Redundant Fans - Six Hot Plug Redundant Fans ship standard with all models. Front Accessible Chassis - Redesigned chassis allows access to memory, processors and hard drives from the front of the server while it remains safely engaged in the rack.
This provides easier serviceability and lowers the chance of interfering with neighboring servers' cables and components. Hot Plug Universal Drives - Up to eight Hot Plug Universal SFF SAS drives are supported. Hot Plug Redundant Power Supplies - Two Hot Plug Redundant Power Supplies ship standard with all 2P High Performance Models (2nd Hot Plug Redundant Power Supply is optional with 1P base models).
Serviceability. Front and Rear accessibility provides unsurpassed serviceability by allowing the server to remain safely secured in the rack while maintaining Hot Plug RAID Memory, Hot Plug Universal Hard Drives, Hot Plug Redundant Power Supplies, as well as Processors and Processor Power Modules. Innovative Diagnostic Lighting. Systems Insight Display - precisely depicts all major subsystems of the server (PCI I/O, Memory, CPU, Redundant Cooling, Interlock, Thermtrip) and gives instant visual indication of fault status. Located on top front of server. LED display on front panel indicates power, internal health, external health, Unit ID light. LED display on Memory board indicates Memory status, health, and protection mode.
LED display on Processor board indicates Processor and Processor Power Module health. Processor Dual-Core 64-bit Intel® Xeon™ 7140M Processor (3.40 GHz, 150Watts, 800MHz FSB) NOTE: This processor option kit supports the HP ProLiant DL580 G4 and the HP ProLiant ML570 G4. Dual-Core 64-bit Intel® Xeon™ 7130M Processor (3.20 GHz, 150 Watts, 800MHz FSB) NOTE: This processor option kit supports the HP ProLiant DL580 G4 and the HP ProLiant ML570 G4. Dual-Core 64-bit Intel® Xeon™ 7120M Processor (3.00 GHz, 95 Watts, 800MHz FSB) NOTE: This processor option kit supports the HP ProLiant DL580 G4 and the HP ProLiant ML570 G4. Dual-Core 64-bit Intel® Xeon™ 7110M Processor (2.60 GHz, 95 Watts, 800MHz FSB) NOTE: This processor option kit supports the HP ProLiant DL580 G4 and the HP ProLiant ML570 G4. Dual-Core 64-bit Intel® Xeon™ 7041 Processor (3.00 GHz, 165 Watts, 800MHz FSB) NOTE: This processor option kit supports the HP ProLiant DL580 G4 and the HP ProLiant ML570 G4.
Dual-Core 64-bit Intel® Xeon™ 7030 Processor (2.80 GHz, 165 Watts, 800MHz FSB) NOTE: This processor option kit supports the HP ProLiant DL580 G4 and the HP ProLiant ML570 G4. DL580 G4 Memory (DIMMs) 8 GB (2 x 4 GB 2RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit. HP StorageWorks Modular Smart Array 20 HP StorageWorks Modular Smart Array 20 NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies. HP StorageWorks Modular Smart Array 20 Starter Kit NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies.
Includes Smart Array 6402/128 Controller. 366172-B21 NOTE: The Modular Smart Array Enclosure 20 Family supports the SATA 1.5Gb/s 3.5” Hot Plug Hard Drives. HP StorageWorks Modular Smart Array 30 HP StorageWorks Modular Smart Array 30 SB NOTE: Rack-mountable 14 drive enclosure with single bus, redundant power supplies. 302969-B21 HP StorageWorks Modular Smart Array 30 DB NOTE: Rack-mountable 14 drive enclosure with dual bus, redundant power supplies. 302970-B21 NOTE: The Modular Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 Hot Plug Hard Drives. HP StorageWorks Modular Smart Array 50 HP StorageWorks Modular Smart Array 50 Enclosure. HP Rack 10842 (42U, 800mm wide) – Pallet HP Rack 10842 (42U, 800mm wide) – Shock Pallet HP Rack 10647 (47U) – Pallet HP Rack 10647 (47U) – Crated 245160-B23 HP Rack 10622 (22U) – Pallet HP Rack 10622 (22U) – Shock Pallet HP Rack 10622 (22U) – Crated 245163-B23 NOTE: xxxxxx-B21 (pallet) used to ship empty racks shipped on a truck.B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels).
Xxxxxx-B23 (crated) used for air shipments of empty racks. NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: NOTE: For additional information regarding Rack Cabinets, please see the following URL:. Keyboards and Monitors TFT7210R Rack Mounted 17' Monitor. U6316E NOTE: For more information, customer/resellers can contact: Memory HP ProLiant DL580 G4 2P Models NOTE: Memory configurations listed do not apply to 'Factory Integrated Models'. Standard Memory 4 GB PC2-3200 Registered Memory (DDR2-400) with Advanced ECC functionality Standard Memory Plus Optional Memory and Optional Memory Boards Up to 52 GB of memory is available with the optional installation of PC2-3200 Registered (DDR2-400) Option Kits and the use of all four memory boards.
Standard Memory Replaced with Optional Memory and Optional memory board Up to 64 GB of memory is available with the removal of the standard 4 GB of memory, the optional installation of PC2-3200 Registered (DDR2-400) Option Kits and the use of all four memory boards. NOTE: Memory must be added in banks of two DIMMS. This chart does not represent all possible memory configurations.
Additional requirements may apply to enable Advanced Memory Protection features. Standard Memory Standard Memory Board (Slots). 4 GB HP ProLiant DL580 G4 1P Models NOTE: Memory configurations listed do not apply to 'Factory Integrated Models'.
Standard Memory 2 GB PC2-3200 Registered Memory (DDR2-400) with Advanced ECC functionality Standard Memory Plus Optional Memory and Optional Memory Boards Up to 58 GB of memory is available with the optional installation of PC2-3200 Registered (DDR2-400) Option Kits and the use of all four memory boards. Standard Memory Replaced with Optional Memory and Optional memory board Up to 64 GB of memory is available with the removal of the standard 2 GB of memory, the optional installation of PC2-3200 Registered (DDR2-400) Option Kits and the use of all four memory boards. NOTE: Memory must be added in banks of two DIMMS.
This chart does not represent all possible memory configurations. Additional requirements may apply to enable Advanced Memory Protection features. Standard Memory Standard Memory Board (Slots).
1 GB (2 x 512 MB 1RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit NOTE: With Advanced ECC and online spare memory capabilities. DL580 G4 Memory Expansion Board NOTE: The HP ProLiant DL580 G4 utilizes up to four Memory Expansion Boards that support up to four DIMMs each. These memory boards are Front accessible providing unsurpassed levels of memory protection as well as scalability for the most memory-intensive applications. See Memory Configuration Diagram. NOTE: One Memory Expansion Board ships standard with 1P base models and two Memory Expansion Boards ship standard with 2P High Performance models.
6 8-Bay SAS/SATA Drive Cage. Supports up to 8 Small Form Factor (SFF) SAS or SATA Hot Plug Drives Drive Support Quantity Supported Position Supported Controller Slimline Drives (ejectable) 1.44-MB Slimline Diskette Drive Up to 2 3 or 4 Integrated IDE slimline CD-ROM Drive Up to 2 3 or 4 Integrated IDE Slimline DVD-ROM Drive (8X/24X) Option Kit Up to 2 3 or 4 Integrated IDE NOTE: The HP ProLiant DL580 G4 can support a maximum of two Slimline drives (ejectable). Additional configuration settings may be required if running 2 Diskette Drives. When running 1 diskette drive, the top bay is the default location, but can be changed with additional configuration settings. 10 NOTES: To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool located at URL:. To drill down to calculators:.
Click on: 'ProLiant Servers'. Click on the Server of interest. Example: DL580 G4.
Click on: 'Power Calculator' link. (You may need to scroll down to see it). There are certain Dual-Core, lowline, max configurations that are not supported. All highline configurations are supported. Consult the Power Calculator to determine if your lowline configuration is supported. Standard Rack Model Power Cords / Jumper Cords Description IEC320-C14 to IEC320-C19 Jumper Cord Optional Country Power Cords and Jumper Cords Description.
Quick removal access panel 2. Intel Xeon Processor (High performance models include two processors) 3. Smart Array 6i Array Controller (Ultra320) with optional 128MB Battery Backed Write Cache (BBWC) or Smart Array P600/256 BBWC Controller. (All High performance models include BBWC) 4. Three PCI-X non-hot plug expansion slots (or optional PCI-X hot plug expansion cage or PCI Express expansion cage) 5. Hot-plug fans, full redundancy option (All 2M Cache models and High performance models include fully redundant fans) 6. Quick release lever for fast server access 7.
Front LEDs (show server status) and Unit Identification button/LED (for easy in rack server identification). Support for six Ultra320 SCSI hot plug hard drives (or five hot plug hard drives and one DAT 40 or DAT 72 hot plug tape drive) 11. USB 2.0 port 12. Six PC2-3200R 400MHz DDR2 Sockets 13. Hot plug power supply, redundancy option (High performance models include redundant power supply) 1. Quick removal access panel 2.
Hot-plug fans, full redundancy option (All 2M Cache models and High performance models include fully redundant fans) 3. Front LEDs (show server status) and Unit Identification button/LED (for easy in rack server identification) 4. 24X Max CD-ROM (High performance models include DVD-ROM drive) 5.
Support for eight universal small form factor hot plug hard drives 6. Optional 1.44 MB (3.5') Diskette Drive (High performance models include Diskette Disk Drive) 7. USB 2.0 port. Hot plug power supply, redundancy option (High performance models include redundant power supply) 11. Three PCI-X non-hot plug expansion slots (or optional PCI-X hot plug expansion cage or PCI Express expansion cage) 12. Smart Array P600/256 BBWC Controller (All High performance models include BBWC) What's New Introducing the ProLiant DL380 G4 SAS model with the latest Dual-core Intel Xeon Processors with Hyperthreading technology for maximum application performance.
New SAS Model: DL380R04 X2.8-2x2MB/800 DC, 1GB SAS. Improve server responsiveness. Increase performance up to 50%. Enhance multi-tasking At a Glance The HP ProLiant DL380, the world's largest selling server, delivers on its history of design excellence with enterprise-class uptime and manageability, proven 2-way Intel Xeon performance, and 2U density for a variety of rack deployments and applications. Cache Memory One of the following depending on Model 2MB Level 2 cache 2x2MB Level 2 cache (Dual-core Models) Upgradeability Upgradeable to dual processing Chipset Intel E7520 Chipset NOTE: For more information regarding Intel chipsets, please see the following URL:.
Memory Protection Online spare Advanced ECC DL380 G4 Memory One of the following depending on model Type PC2-3200R 400MHz DDR2 Standard (base models) 1 GB (2 x 512 MB) Standard (High Performance models) 2 GB (2 x 1024 MB) Maximum 12 GB Network Controller Embedded NC7782 PCI-X Gigabit Server Adapter PCI-X Non-Hot Plug Riser Expansion Slots. NA NOTE: x8 cards are supported but will run at x4 speeds. NOTE: Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number. NOTE: Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).
Storage Controller One of the following depending on model Smart Array 6i Controller (integrated on system board) Smart Array P600/256 BBWC Controller (SAS Models) Storage Diskette Drive 1.44 MB Diskette Drive (optional on some models) Optical Drive 24x IDE CD-ROM (IDE DVD-ROM included on High performance models) Hard Drives None Standard NOTE: U320 SCSI models can be operated in single channel or dual channel (2/4 split). SCSI configuration kit (364471-B21) is required for dual channel configurations. Maximum Internal Storage Type Hot Plug U320 SCSI 1.8TB 6 x 300GB with standard internal hot plug SCSI drive cage Hot Plug SAS 1.168TB 8 x 146GB with standard internal hot plug small form factor SAS drive cage Interfaces Serial 1 Pointing Device (Mouse) 1 Graphics 1 Keyboard 1 External SCSI (VHDCI) 1 NOTE: External VHDCI not included on SAS Models. Network RJ-45 3 (1 for iLO) USB 2.0 Ports 3 total: 1 front, 2 back NOTE: Please see the following URL for additional information regarding USB support:. Graphics Integrated ATI Rage XL Video Controller with 8-MB SDRAM Video Memory Form Factor Rack (2U), (3.5-inch) ProLiant Essentials Foundation Pack Software HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible environment to centrally manage servers, storage and other infrastructure devices across multiple operating system platforms. Through a single management view, HP SIM provides core management services that include device discovery and identification, event views, health monitoring, inventory data collection, software version control and reporting.
HP SIM is built on industry standards and is extensible with value-added ProLiant Essentials, Integrity Essentials and Storage Essentials software to meet individual management needs. For more details on HP SIM visit. Step 3: Choose Additional Factory Integratable Options Optical Drive Slimline DVD-ROM Drive (8x/24x) Option Kit Slimline CD-RW/DVD-ROM Combo Option Kit HP ProLiant Slim CD-ROM FIO Base 338732-B21 Performance Packs The HP ProLiant DL380 G4 performance packs are necessary to configure a HP ProLiant DL380 G4 High Performance Model. HP ProLiant DL380 G4 High Performance model includes the latest performance technologies and enterprise class availability features pre-installed for convenience and value. The performance pack includes a 2nd processor, redundant fans and power supplies, floppy drive, 128MB (U320 SCSI models) or 256MB (SAS models) of BBWC and the duplex backplane option for U320 SCSI (SCSI configuration kit).
HP DL380G4 3.4/2M HPM Perf Pack FIO, US 382616-001 HP DL380G4 3.6/2M HPM Perf Pack FIO, US 382617-001 HP DL380G4 3.8/2M HPM Perf Pack FIO 382618-001 HP DL380G4 3.6/2M SAS HPM Perf Pack FIO, US 391323-001 HP DL380G4 X2.8-800-2x2M HPM Perf Pack FIO, US (Dual-core) 399631-001 Step 4: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the 'Options' section below. Options NOTE: Some options may not be factory integratable.
Please contact your local sales representative for additional information. HP ProLiant DL380 G4 Unique Options PCI-X Hot Plug Riser Cage Option Kit. NOTE: For additional ProLiant Workload Management Pack License Kits please see the QuickSpecs at: ProLiant Essentials Virtualization Management Software ProLiant Essentials Virtual Machine Management Pack, Single-Server License NOTE: For use with a single server. Contains one license with a unique license activation key and documentation.
435661-B21 ProLiant Essentials Server Migration Pack, Single-Migration License NOTE: Contains one license, enabling 1 server migration, with a unique license activation key and documentation. NOTE: This license allows 1 server to be migrated from a physical server to a virtual machine. Or this license can be used to migrate a virtual machine from one virtualization layer i.e. VMware GSX to a different virtualization layer such as VMware ESX or Microsoft Virtual Server 2005.
Remote Management Integrated Lights-Out Advanced Pack Integrated Lights-Out Advanced Pack, 1 server Featuring: Sophisticated virtual administration features for ultimate control of servers in the data centers and remote sites. Q1595B NOTE: Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional options such as controllers, media, and other related items: (Worldwide) (Worldwide) For an up-to-date listing of the latest O/S and software support details for HP Ultrium tape drives, please visit:. Rack-Mount Tape Drive Enclosures HP StorageWorks 1U SCSI Rack-Mount kit NOTE: The 1U Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232, Ultrium 448 and Ultrium 920 tape drives. HP Data Protector Express Software HP DP Express Backup Server Upgrade for ProLiant Software BB117AP HP DP Express Package for Microsoft Small Business Server BB118AA NOTE: Please see the HP Data Protector Express QuickSpecs for additional information regarding the purchase of HP Data Protector Express software: (Worldwide) NOTE: To obtain a free licensed copy of HP Data Protector Express for ProLiant edition software, please visit the 'Protect Your Data' link accessible from your ProLiant server's System Management Homepage (SMH) software (SmartStart 7.5 or later). Cluster Options ProLiant Cluster Starter Kit.
T2798AA#003 NOTE: For additional information regarding the HP Serviceguard for Linux License, please see the following QuickSpecs at: (Worldwide) NOTE: For configuration/certification options for HP Serviceguard for Linux please go to: HP StorageWorks Modular Smart Array 20 HP StorageWorks Modular Smart Array 20 NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies. HP StorageWorks Modular Smart Array 20 Starter Kit NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies. Includes Smart Array 6402/128 Controller.
![Quick Deploy Rail System Installation Instructions Dl320 Quick Deploy Rail System Installation Instructions Dl320](/uploads/1/2/5/6/125638528/222149400.jpg)
366172-B21 NOTE: The Modular Smart Array Enclosure 20 Family supports the SATA 1.5Gb/s 3.5” Hot Plug Hard Drives. HP StorageWorks Modular Smart Array 30 HP StorageWorks Modular Smart Array 30 SB NOTE: Rack-mountable 14 drive enclosure with single bus, redundant power supplies 302969-B21 HP StorageWorks Modular Smart Array 30 DB NOTE: Rack-mountable 14 drive enclosure with dual bus, redundant power supplies 302970-B21 NOTE: The Modular Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 Hot Plug Hard Drives. HP StorageWorks Modular Smart Array 50 HP StorageWorks Modular Smart Array 50 Enclosure. AF421A HP R3000 VA UPS, 2U, DTC, INTL NOTE: Replaces non-RoHs compliant part numbers 192186-B31, 192186-B32, 192186-B33, 192186-AR1. AF414A HP R3000 VA UPS, 2U, L5-30, NA NOTE: Replaces non-RoHs compliant part number. AF422A HP R3000 VA UPS, 2U, L6-20, NA NOTE: Replaces non-RoHs compliant part number. AF423A HP R3000 VA UPS, 2U, L6-20, JPN NOTE: Replaces non-RoHs compliant part number 192186-292.
AF424A HP R3000 VA UPS, 2U, L5-30, JPN NOTE: Replaces non-RoHs compliant part number 192186-291. AF425A HP R5500 VA UPS, INTL NOTE: Replaces non-RoHs compliant part number 326529-B31. AF416A HP R5500 VA UPS, NA/JPN NOTE: Replaces non-RoHs compliant part number. AF426A HP Monitored Power Distribution Unit (PDU) HP Monitored Power Distribution Unit: Full Rack Version. 245163-B23 NOTE: xxxxxx-B21 (pallet) used to ship empty racks shipped on a truck.B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels). Xxxxxx-B23 (crated) used for air shipments of empty racks. NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment installed.
NOTE: Please see the Rack 10000 QuickSpecs for additional options and Technical Specifications such as height, width, depth, weight, and color: (Worldwide) NOTE: For additional information regarding Rack Cabinets, please see the following URL: Keyboards and Monitors TFT7210R Rack Mounted 17' Monitor TFT7600 Rackmount Keyboard Monitor US TFT7600 Rackmount Keyboard Monitor UK AG053A TFT7600 Rackmount Keyboard Monitor GR AG054A TFT7600 Rackmount Keyboard Monitor FR AG055A TFT7600 Rackmount Keyboard Monitor IT. U8334E NOTE: For more information, customer/resellers can contact.
Memory NOTE: Memory configurations listed do not apply to 'Factory Integrated Models'. HP ProLiant Model DL380 Generation 4 (G4) Base (1P) Models Standard Memory 1 GB PC2 3200 DDR2 SDRAM running at 400MHz comes installed (2 x 512 MB SDRAM) Standard Memory Plus Optional Memory Up to 9 GB memory is available with the optional installation of PC2 3200 Registered DDR2 SDRAM DIMM Memory Option Kit Standard Memory Replaced with Optional Memory Up to 12 GB of memory is available with the removal of the standard 512 MB of memory and the optional installation of PC2 3200 Registered DDR2 SDRAM DIMM Memory Option Kit NOTE: Chart does not represent all possible memory configurations. 2 GB NOTE: In the online spare configuration, the ROM automatically configures the last populated bank as the spare memory. If only banks A and B are populated, bank B is the spare bank. If banks A, B, and C are populated, bank C is the spare bank, Online spare memory is configured through RBSU.
2 GB NOTE: In the online spare configuration, the ROM automatically configures the last populated bank as the spare memory. If only banks A and B are populated, bank B is the spare bank. If banks A, B, and C are populated, bank C is the spare bank, Online spare memory is configured through RBSU. Following are the single rank memory options available from HP:.
1 GB of Advanced PC2 PC3200 DDR2 SDRAM DIMM Memory Kit (2 x 512 MB). 2 GB of Advanced PC2 PC3200 DDR2 SDRAM DIMM Memory Kit (2 x 1024 MB). 4 GB of Advanced PC2 PC3200 DDR2 SDRAM DIMM Memory Kit (2 x 2048 MB) HP ProLiant Model DL380 Generation 4 (G4) Dual Rank Support: Following is the dual rank memory option available from HP:. 4 GB of 2-Rank Advanced ECC PC3200 DDR2-400 SDRAM DIMM Memory Kit (2 x 2048 MB) Following are the single/dual rank memory population rules for the HP ProLiant DL380 G4.
Key: S denotes single rank kit, D denotes Dual rank kit, and X denotes no install. 2-3 Power cord requirements Nema 5-15P to IEC320-C13 Option no. / Spare no: See chart on Page 2 IEC320-C13 to IEC320-C14 Option no. / Spare no.: 142259-001/142258-B21 NOTES: - To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool located at url: To drill down to calculators:. Click on: “ProLiant Servers”.
Click on the Server of interest. Example: DL380 G4. Click on: “Power Calculator” link. (You may need to scroll down to see it) # - Power cords (13 Cord Sets). 163719-002 Quickspecs System Unit Dimensions (HxWxD) (with feet/bezel) 3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm) Weight(approximate) Maximum 60 lb (27.22 kg) No drives: 47.18 lb (20.41 kg) Input Requirements (per power supply) Rated Input Voltage 100-132 VAC, 200-240 VAC Rated Input Current 7.5A (100VAC), 3.8A (200VAC) Rated Input Frequency 50 to 60 Hz Rated Input Power 735 W BTU Rating 2508 BTU/HR Power Specifications To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool located at URL:.
To drill down to calculators: - Click on: 'ProLiant Servers' - Click on the Server of interest. Example: DL380 G4 - Click on: 'Power Calculator' link.
(You may need to scroll down to see it.) SCSI Connectors One external VHDCI connector NOTE: External VHDCI not included on SAS Models Power Supply Output Power (per power supply) Rated Steady-State Power 575W Maximum Peak Power 575W Temperature Range NOTE: All temperature ratings shown are for sea level. An altitude derating of 1 C° per 300 m (1.8 FR per 1000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed.
Operating 50° to 95° F (10° to 35° C) Shipping -40° to 158° F (-40° to 70° C) Maximum Wet Bulb Temperature 82.4° F (28° C) Relative Humidity (non-condensing) NOTE: Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 kPa. Operating 10% to 90% Shipping 5% to 95% Acoustic Noise Idle Minimum (Fixed Disk Drives Spinning).